ZEP A-ONE EXTRA HEAVY-DUTY INDUSTRIAL CLEANER CONCENTRATE 5Gal

Zep A-One is a concentrated, water-based, low-foam industrial cleaner designed for tough cleaning tasks. This versatile formula effectively cleans concrete, masonry, brick, tile, and industrial floors by suspending soils and brightening surfaces while removing grease, oil, and light rust stains. Ideal for use in automatic scrubbers and various industrial applications, this product provides efficient cleaning with a pleasant, clean fragrance.

• Superior Cleaning: Removes stubborn dirt, salts, carbon, and even light rust stains,
• Multi-Surface Versatility: Effectively cleans concrete floors, tiles, brick, and masonry.
• Low-Foaming: Optimised for industrial cleaning equipment, ensuring efficient performance in automatic scrubbers without excessive foam.
• Surface Brightening Power: Lifts and suspends soils, grease, and light rust stains, leaving surfaces noticeably cleaner and brighter.
• Flexible Application Methods: Can be used with a mop, brush, spray, or automatic scrubber, adapting to a wide range of cleaning needs.
• FOR INDUSTRIAL AND BUSINESS USE ONLY.

Safety Items: Gloves; Glasses; Ventilation

Instructions

THIS CONCENTRATED PRODUCT MUST BE DILUTED AS DIRECTED PRIOR TO USE.

• General Industrial Applications: Dilute 1 part product with 8 to 10 parts hot or cold water and spray or mop on surface. Allow contact time of 3 to 5 minutes and scrub. Rinse with water.
• Bathroom Cleaning: Use at a rate of 4 to 8 ounces per gallon to clean floors, walls, counters, and sinks. Rinse thoroughly with fresh water. For toilets, urinals, showers, and tubs, use at a rate of 6 to 10 ounces per gallon. Allow product to stand for several minutes, scrub as necessary, then rinse with fresh water. 
• Smoke and Fire Damage: Dilute 1 part product with 8 parts hot water. Apply to soot or carbon soils with a brush or low-pressure spray. Amount of solution required depends on degree of soil and porosity of the surface. Rinse with water to prevent redeposition of soils.
• Industrial Floors and Concrete: Dilute 1 part product with 8 parts hot water and apply with mop or pressure sprayer. Scrub using a floor machine or deck brush. Allow a contact time of 5 to 10 minutes, but do not allow to dry. Pick up solution with wet pick-up vacuum, mop and wringer, or flush to the floor drain. Rinse floor thoroughly.